Care Instructions For Airbrush Art Tattoos When doing airbrush art tattoos there are some things that must been done to ensure that the airbrush tattoo ink sticks to the skin and does not fade quickly. When the prep work is done right and the customer understands the care instructions they can get many days of realistic looking artwork on their bodies. Wood surfaces should be sanded prior to doing any airbrush art. Take the time to use sand paper and lightly sand the wood down by hand. If you are doing a mural on a wood floor then use a hand floor sander. You don't want to mar the wood only remove any rough areas. If the wood has been waxed or has a gloss coat then sanding this will remove this and allow for the paint to stick to the surface. The paint can be automotive paint but make sure that you use a well ventilated area as the fumes can pose a health hazard. It is best when using automotive paint to wear a respirator at all times. When using automotive paint make sure that it is thin enough to flow through the airbrush. If the automotive paint that you have chosen does not flow then thin it down so that it flows. You just took two things you seen incorporated them both together turned them into something else and now you have a unique floating cloud playground. Inspiration can also come from books as well. Go to the library and check out some art books to help you get some inspiration to get you going again with your creative design. The publication is subscription based and can be obtain with a one year or a two year subscription. This is a good one if you are just wanting to gain more knowledge on airbrushing techniques whether you airbrush as a hobby or you do it professionally. The wide array of surfaces that Airbrush Technique Magazine covers includes but not limited to t-shirts ,canvas, the body, autos, motorcycles and so much more. It will be worth it in the long run. Most of the times you will need to heat set your paints so that they can be washed without fading or bleeding. There are a few ways that you can heat set your airbrush art onto the t-shirts so that it lasts. One way is all the design to fully dry then place a cloth over it and iron the shirt with the cloth between the t-shirt and the iron.